TSW210

Specifications

ETHERNET

LAN                                          8 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
crossover

PERFORMANCE SPECIFICATIONS

Bandwidth (Non-blocking)       20 Gbps

Packet buffer                           128 KB

MAC address table size           2K entries

Jumbo frame                            9216 bytes
support

POWER

Connector                              2 pin industrial DC power socket

Input voltage range                7-57 VDC

Power consumption              1,03 W / 3.71 W
(idle/max no PoE/max)

PHYSICAL INTERFACES (PORTS, LEDS)

Ethernet                             8 x RJ45 ports, 10/100/1000 Mbps

Fiber                                  2 x SFP ports

Status LED’s                     1 x Power LED, 16 x LAN status LED’s 2 x SFP status LED’s

Power                                1 x 2 pin industrial DC power socket

Ground                              1 x Grounding screw

PHYSICAL SPECIFICATION

Casing material                 Full aluminum housing

Dimensions (W x H x D)   132 x 44.2 x 95.1 mm

Weight                              456 g

Mounting                           DIN rail or wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature     -40 °C to +75 °C

Operating humidity           10 % to 90 % non condensing

Ingress Protection Rating  IP30

TSW110

Specifications

ETHERNET

LAN                                        5 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
crossover

PERFORMANCE SPECIFICATIONS

Bandwidth (Non-blocking)       10 Gbps

Packet buffer                           128 KB

MAC address table size           2K entries

Connector                                4 pin industrial DC power socket

Input voltage range                  9 – 30 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)                          Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards

Power consumption                < 0.4 W/ <1.8 W
(idle/max)

PHYSICAL INTERFACES (PORTS, LEDS)

Ethernet                             5 x RJ45 ports, 10/100/1000 Mbps

Status LED’s                     1 x Power LED, 10 x LAN status LED’s

Power                                1 x 4 pin DC connector

Ground                              1 x Grounding screw

PHYSICAL SPECIFICATION

Casing material                 Full aluminum housing

Dimensions (W x H x D)   100 x 30 x 85 mm

Weight                                227 g

Mounting                           DIN rail or wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature     -40 °C to +75 °C

Operating humidity           10 % to 90 % non condensing

TSW200

Specifications

ETHERNET

LAN                                          8 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
crossover

Fiber                                         2 x SFP ports

POE

PoE ports                                  Port 1 – 8

PoE standards                          802.3af and 802.3at

PoE Max Power                        30 W
per Port (at PSE)

Total PoE Power                       240W
Budget (at PSE)

PERFORMANCE SPECIFICATIONS

Bandwidth (Non-blocking)       20 Gbps

Packet buffer                           128 KB

MAC address table size           2K entries

POWER

Connector                              4 pin industrial DC power socket

Input voltage range                7-57 VDC

Input voltage range                44-57 VDC
for PoE

Power consumption            <2.2 W/<19 W/106 W
(idle/max no PoE/max)

PHYSICAL INTERFACES (PORTS, LEDS)

Ethernet                             8 x RJ45 ports, 10/100/1000 Mbps

Fiber                                  2 x SFP ports

Status LED’s                     1 x Power LED, 16 x LAN status LED’s 2 x SFP status LED’s

Power                                1 x 2 pin industrial DC power socket

Ground                              1 x Grounding screw

PHYSICAL SPECIFICATION

Casing material                 Full aluminum housing

Dimensions (W x H x D)   132 x 44.2 x 95.1 mm

Mounting                           DIN rail or wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature     -40 °C to +75 °C

Operating humidity           10 % to 90 % non condensing

Ingress Protection Rating  IP30

TSW100

Specifications

ETHERNET

LAN                                             5 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto

MDI/MDIX crossover

POE

PoE                                             ports Port 1- 4

PoE standards                           802.3af and 802.3at

PoE Max Power                         30 W
per Port (at PSE

Total PoE Power                       120 W
Budget (at PSE)

PERFORMANCE SPECIFICATIONS

Bandwidth (Non-blocking)        10 Gbps

Packet buffer                             128 KB

MAC address table size           2K entries

POWER

Connector                              4 pin industrial DC power socket

Input voltage range                7-57 VDC

Input voltage range                44-57 VDC
for PoE

Power consumption               2 W/9 W/129 W
(idle/max no PoE/max)

PHYSICAL INTERFACES (PORTS, LEDS)

Ethernet                              5 x RJ45 ports, 10/100/1000 Mbps

Status LED’s                      1 x Power LED, 10 x LAN status LED’s

Power                                1 x 4 pin DC connector

Ground                              1 x Grounding screw

PHYSICAL SPECIFICATION

Casing material                 Full aluminum housing

Dimensions (W x H x D)   115 x 32 x 95 mm

Mounting                           DIN rail or wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature    -40 °C to +75 °C

Operating humidity          10 % to 90 % non condensing

 

STANDARD PACKAGE CONTAINS*

• TSW100
• 65 W PSU
• QSG (Quick Start Guide)
• Packaging box

2 CORE – AIR DROP FIBER OPTIC CABLE

STRUCTURE SPECIFICATION

Attenuation dB/km

  • 1310nm ≤ 0.4
  • 1550nm ≤ 0.3

Chromatic Dispersion ps/nm.km

  • 1310nm≤ 3.6
  • 1550nm≤ 18
  • 1625nm≤ 22

Zero Dispersion Slope ps/nm2.km

  • ≤ 0.092

Zero Dispersion Wavelength nm

  • 1300 ~ 1324

Cut-off Wavelength (λcc) nm

  • ≤ 1260

Attenuation vs. Bending
(60mm x100turns) dB

  • (30mm radius，100ring) ≤ 0.1 @ 1625nm
  • (10mm radius，1ring)≤ 1.5 @ 1625nm

Mode Field Diameter µm

  •  9.2 + 0.4 at 1310nm

Core-Clad Concentricity µm

  •  ≤ 0.5

Cladding Diameter µm

  • 125±1

Cladding Non-circularity %

  • ≤ 0.8

Coating Diameter µm

  • 245±5

Proof Test Gpa

  • ≥ 0.69

6 CORE – AIR DROP FIBER OPTIC CABLE Tweet

STRUCTURE SPECIFICATION

Loose Tube

  • OD(mm): 2.2±0.1
  • Material： PBT

Strength member

  • Steel wire（1.0mm）

Sheath

  • Thickness: Non. 1.9mm
  • Material： HDPE

OD of cable (mm)

6.0±0.2
Fiber type

  • G652D G657A

Attenuation dB/km

  • 1310nm ≤ 0.36
  • 1550nm ≤ 0.22

Chromatic Dispersion ps/nm.km

  • 1310nm≤ 3.5
  • 1550nm≤ 18
  • 1625nm≤ 22

Zero Dispersion Slope ps/nm2.km

  • ≤ 0.092

Zero Dispersion Wavelength nm

  • 1300 ~ 1324

Cut-off Wavelength (λcc) nm

  • ≤ 1260

Attenuation vs. Bending
(60mm x100turns) dB

  • (30mm radius，100ring) ≤ 0.1 @ 1625nm
  • (10mm radius，1ring)≤ 1.5 @ 1625nm

Mode Field Diameter µm

  •  9.2 + 0.4 at 1310nm

Core-Clad Concentricity µm

  •  ≤ 0.5

Cladding Diameter µm

  • 125±1

Cladding Non-circularity %

  • ≤ 0.8

Coating Diameter µm

  • 245±5

Proof Test Gpa

  • ≥ 0.69

6 UNITS Wall Mounted Cabinet

Features:

  1. Double section structure wall mounted cabinet, the open angle between the two sections is 120 degrees, the open angle for front door is over 180 degrees.
  2. Reliable structure, static loading capacity: 60KG.
  3. Quick and easy wall mounted, 19″ standard installation inside.
  4. The hinges for the back section are black heavy duty type.
  5. 5.120mm size fan could be installed at top of cabinet.
  6. Cable entry from top and bottom.
  7. IP Degrees: IP20.
  8. Flexible packing methods allows for convenient stocking and end user delivery
  9. Multiple sizes available.
  10. Customization requests welcome.
  11. The type could be in flat package saving more space and freight.

 

Standards and Materials:

Comply with ANSI/EIA; RS-310-D; IEC297-2; DIN41491: PART1; DIN41494: PART7; GB/T3047.2-92 standard, compatible with 19″ international standard, metric system and ETSI standard.

Finish: SPCC cold rolled steel or EG steel Finish: Mounting profile: 2.0mm; others: 1.2mm to 1.5mm

Color:

  • RAL9004(black)
  • RAL7035(grey)
  • RAL7039(dark grey)

Cat6 SFTP Outdoor Network Cable

Application:

  • 100Base-TX
  • 100Base-T
  • 100VG-AnyLAN
  • 1000Base-T(Gigabit Ethernet)
  • 1000Base-TX
  • ATM
  • Noisy Environments

Conductor

  • Material :SOLID-Bare Copper
  • Nom.O.D.(mm): 0.580 up +0.008   down -0.008

Insulation

  • Material: HDPE
  • Diameter: 1.10±0.05 mm

Inner Screening
Material

  • Aluminum Foil :0.075*25mm
  • Drain wire :YES

Braid

  • Aluminum Foil +Braiding : 7*16   0.12 MM
  • Coverage : ≥80%

Sheath

  • Thickness: 0.60±0.02 mm
  • External O.D.: 7.6±0.2 mm
  • Surface:Clean,Frap
  • Material: PE(JellyFilled)
  • Color: Black

Surface Printing

  • Letter height:  2.5±0.3mm
  • Color:  White
  • Print error & Space : ≤±0.5%，1m

Core Color

  • 1 White-Blue/Blue
  • 2 White-Orange/Orange
  • 3 White-Green/Green
  • 4 White-Brown/Brown

Packing

  • Wooden Tray & Carton

Carton Dimension

  • 380*380*315 mm

Packing length 

305±1.0m

Rip-cord

  • Yes

Cat5e SFTP Outdoor Network Cable

Application:

  • 100Base-TX 100Base-T
  • 100VG-AnyLAN
  • 1000Base-T(Gigabit Ethernet) 1000Base-TX
  • ATM

Conductor

  • Material :SOLID-Bare Copper
  • Nom.O.D.(mm): 0.510 up +0.008   down -0.008

Insulation

  • Material:HDPE
  • Diameter: 1.01±0.05mm

Inner Screening
Material

  • Aluminum Foil :0.075*20mm
  • Drain wire :YES

Braid

  • Aluminum Foil +Braiding : 7*16   0.12 MM
  • Coverage : ≥80%

Sheath

  • Thickness: 0.60±0.02 mm
  • External O.D.: 6.2±0.2 mm
  • Surface:Clean,Frap
  • Material: PE (JellyFilled)
  • Color: Black

Surface Printing

  • Letter height:  2.5±0.3mm
  • Color:  White
  • Print error & Space : ≤±0.5%，1m

Core Color

  • A.Blue, White-Blue
  • B.Orange,White-Orange
  • C.Green,White-Green
  • D.Brown, White-Brown

Packing

  • Wooden Tray & Carton

Carton Dimension

  • 345*345 * 295 mm

Packing length 

  • 305±1.0m

UBNT airFiber® X (AF-5X)

Engineered for Performance

Ubiquiti’s INVICTUS™ custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications.

Deployment Flexibility

The compact form factor allows the airFiber X to be used with airFiber Slant 45 antennas, or instantly upgrade a 5 GHz Rocket™link that uses a RocketDish™RD‑5G30/RD‑5G34* antenna.

Carrier Backhaul for the World

Deploy the 2.4, 3, 4, 5 or 11 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber X features multiple channel width options to suit your deployment needs – up to 11 different channel sizes available for the AF-2X or AF-3X.

Optimal Operation and Channel Configuration

Channel width flexibility allows you to independently configure TX and RX channel frequencies and place them anywhere within the radio band to avoid local interference. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements.

 

 

 

AF-5X
Frequency 5 GHz
Throughput 500+ Mbps
Range 200+ km